Body-Solid Pec Dec Machine | GPM65
Was | Now $675.00
Save : $100
About
Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
| Warranty | |
| COMMERCIAL WARRANTY | |
| FRAME & WELDS: | Lifetime |
| PULLEYS, BUSHINGS, BEARINGS, HARDWARE, PLATES, GUIDE RODS: | 3 Years |
| CABLES, UPHOLSTERY, GRIPS (NORMAL WEAR): | 1 Year |
| Specifications | |
| Frame: | 2" x 2" high tensile strength steel frame. |
| Upholstery: | Extra-thick and super tough DuraFirm™ seat and back pads. |
| Weight: | 91lb / 41.28kg |
| Dimensions: | 65"H x 32"L x 28"W |
FEATURES
Body-Solid Pec Dec Machine | GPM65 Key Features:
- 2″ x 2″ high tensile strength steel frame.
- Extra-thick and super tough DuraFirm™ seat and back pads.
- Fully adjustable to accommodate any size user.
- Articulating arms for unilateral and bilateral chest development.
CUSTOMER QUESTIONS & ANSWERS
How long does this take to assemble approximately time wise? Is it easy to put together yourself?
1.5 hours. Easily accomplished by myself with minimal tools. There are no instructions, only an assembly schematic; however, this is absolutely par for the course with home gym equipment.
Answer #1 on August 18, 2018
I put it together in an hour, the instructions included themselves are vague, I loosely fitted most of the assembly until it was correct them went back to tighten all the bolts. The plastic sleeves which allow the machine to move are difficult to place as they can be assembled incorrectly and and are hard to remove once you put them in place. Overall it can be done with the minimum of tools and experience.
Answer #2 on July 9, 2017
Are the weight sleeve extended bars 1 inch or 2 inch Olympic? If 1”, which converter recommend?
The unit does not include the Olympic plate adapters. We recommend the Body-Solid 8″ Adapter Sleeve – model OA8. You would need two pieces.
Answer #1 on November 4, 2019
Maybe I missed it, but does this machine allow you to do forward and reverse fly?
Yes
Answer #1 on November 25, 2014
What is the max weight this machine allows you to move?
I guess it depends on how strong you are, and how safely you can operate the machine. The most weight I had on is four 20kg plates, and that was pushing myself due to the semi circle tracking motion the machine allows you to move.
Answer #1 on May 16, 2017
I use 3 x 45lbs per side without a problem, and the machine is still moving smoothly.
Answer #1 on May 16, 2017
Is this machine comfortable for tall people (I'm 6' 2")?
It is. I’m 6′ 1″ and my buddy is 6′ 3″ and we haven’t had any issues.
Answer #1 on July 11, 2014
Can you work your rear delts with this?
Yes having this machine is at home is just like going to the gym. I love it
Answer #1 on December 3, 2013
This is for pectoral fly as well, right?
Yes, it is primarily for pecs, but can also be used for rear delt flyes
Answer #1 on January 12, 2015
What is the thickness of the frame?
The frame is a 2″ x 2″ high-tensile strength steel frame.
Answer #1 on December 30, 2016
Which weight set and/or brand does this work with?
The Body-Solid GPM65 Plate Loaded Pec Machine comes with standard sized weight posts that will accept plates with a 1″ diameter center hole. If you utilize Olympic weight adapter sleeves with the machine, you can then use Olympic plates with a 2″ diameter center hole.
Answer #1 on July 19, 2016
Does this machine allow you to do a butterfly type motion where you bring the arms together or is it just a push out motion?
Your arms move in a semi circular motion from rear to front. So the answer to your question is yes they do come together in the front on a butterfly motion. It is a very smooth operation, with no jerking and the path is locked in so you cannot injure yourself.
Answer #1 on May 19, 2016
Are the arms ajustable so that they dont go back as fair? Also does this machine hurt your shoulders any using it once or twice a week?
The arms have 6 adjustment positions so yes they can be set so you don’t have to reach back too far. It doesn’t hurt your shoulders. You control how many plates you put on it. I use it 3 or 4 times per week starting with 40 pounds and up to 70 pounds with my last set…and I’m 60. So no worries.
Answer #1 on May 13, 2014
What is the height? (from bottom to top)
Assembled height of the Body-Solid GPM65 Plate Loaded Pec Machine is 65 inches.
Answer #1 on March 4, 2017
Is it possible to adjust ( lower) the arms so that tall people can avoid to contact their head with the top ( over the head)?
You can’t adjust the height of the arms but you can adjust the seat. I have a friend of mine that trains on mine and he’s 6’4″ and has no problems with it.
Answer #1 on March 3, 2017
Reviews
Fast Delivery
Always on Time. In-Home Delivery & Assembly Services Available.
Lower Price Guarantee
Lowest Prices with the Top Manufacturers.
Customer Service
Phone and Online Specialists.
(800) 771-2730
Fast Delivery
Always on Time. In-Home Delivery & Assembly Services Available.
Lower Price Guarantee
Lowest Prices with the Top Manufacturers.
Customer Service
Phone and Online Specialists.
(800) 771-2730
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"I love mine. I was hesitant to buy it without trying it out but I'm extremely happy with it. Once lubricated the action is smooth. The arms have multiple positions you can lock them into, just like a commercial machine. I use the machine for reverse flies just as often as I do for flies and it's great for both. I've been using it twice a week for over a month with up to 100 pounds without incident. You can buy adapter sleeves separately to allow a snug fit for olympic plates but I haven't seen the need for them. Olympic plates stay on just fine and don't spin around or do anything else distracting without the adapter sleeves. The instructions consist of just an exploded drawing of the machine. I'm not the brightest bulb but I still figured it out and put it together. Make sure to lubricate the moving parts when assembling (no lubricant was supplied, at least with mine). The pads for the back/chest and rear seem a little flimsy but I haven't had an issue with them yet. Overall, this is an excellent machine and I'm pleased I added it to my home gym."
~ Grendel D.
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"After examining several pec fly machines, I decided to go with this one. I need something compact. I like the simple design, nothing extra. The others such as Yukon have a foot rest, which, although is good, is, I believe unnecessary and takes up additional room. The setup is straightforward. Note the THINNER- WALLED COLLAR GOES OVER THE CHROME COLUMNS -- so the weighted pulley can slide smoothly. It is an amazing piece of machine. It is smooth and quiet, and the movement has a slight upward cant which is I EXACTLY what I wanted to work the upper pecs. If I wanted to work even more of the upper pec I simply use the upper handles. As far as working the rear deltoids are concerned, I find that I am weaker in that aspect, therefore, changing weights can be a pain. I now only wish that they come with a selectable stack weight option. Well, after I wear this one out, if ever, I may upgrade to a commercial version."
~ SL
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"This is my third purchase of this machine. Bought one in 09 for my first home gym, then moved and sold it, bought one for my parents home gym, and just bought this one. Seems like they doubled on the price after covid hit but it’s a quality machine so who cares. Easy to assemble. Highly recommended if you want that pump on chest day"
~ Steven
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"This is probably the most expensive workout equipment i bought but it's worth the price..came in 2 boxes..took about an hour to put together..not much instructions but pretty easy to figure out...everything works out pretty smooth..no unnecessary noise..i used to do more than 200 lbs at the gym with this kind of machine but 2 45lbs are already challenging but very smooth..can't wait to put more weight"
~ Denver
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"Great machine for the money. I'd recommend to my friends. My only small ding is I wish the seat back was a little further towards the front of the machine. Other than that, great purchase."
~ Denny K.
Body-Solid Pec Dec Machine | GPM65
Body-Solid Pec Dec Machine | GPM65 BS-GPM65Freestanding and balanced, the Body-Solid Pec Dec Machine | GPM65 is two machines in one and both give you unrestricted full range-of-motion. Dual overhead variable resistance cams allow each arm to operate independently, thus providing unilateral and bilateral Chest, Back, and Shoulder conditioning. Independent range of motion adjustments provide all users with a deep, full stretch.
The GPM65 is uniquely designed articulating Pec Arms provided optimal Pectoral and Rear Deltoid development. High weight capacity and low profile design provide excellent balance and control when pushing to the limit. The Body-Solid Pec Dec Machine | GPM65 is deal for home and commercial use.
"I absolutely love this machine! It targets the pecks and rear delts great. Super solid and smooth!!I am very happy with this peck deck. It was easy to assemble and it is smooth as silk. Honestly it's almost as smooth as a commercial setup. At 6'3 it fit is not a problem. Highly recommended!"
~ Dan