About

Keep your workout area safe, clean and organized with this Body-Solid Olympic Weight Tree and Bar Rack | GOWT! Six 2″ x 8″ weight plate storage posts keep plates safely suspended off the floor for easy storage and removal –just slip on the weights after you’re done and you’ll keep your workout room uncluttered. It can hold up to 1,000 lbs. of weight in several configurations, including a series of 45-, 35-, 25-, 10-, 5-, and 2.5-pound weights.

The rack also offers space to store a pair of Olympic bar holders, and includes a central weight-load distribution system that virtually eliminates the risk of tipping. Made of high-tensile-strength steel with all-four-side welded construction and finished with ultra-tough, electrostatically applied powder coat finish, the Body-Solid Olympic Weight Tree and Bar Rack | GOWT measures 23 by 40 by 20 inches (W x H x D) and carries a lifetime warranty. The weight plates and bars are sold separately.

Silver gray finish. Weight plates and bars optional

Warranty
COMMERCIAL WARRANTY
FRAME & WELDS: Lifetime
PULLEYS, BUSHINGS, BEARINGS, HARDWARE, PLATES, GUIDE RODS: 3 Years
CABLES, UPHOLSTERY, GRIPS (NORMAL WEAR): 1 Year
Specifications
Frame: Heavy-duty 2" x 2" and 2" x 3" high tensile strength steel with all-4-side welded construction
Finish: Ultra-tough electrostatically applied powder coat finish
Weight: 31 lbs
Dimensions: 40"H x 20"L x 23"W

Reviews

  1. Body-Solid Olympic Weight Tree and Bar Rack | GOWT

    Body-Solid Olympic Weight Tree and Bar Rack | GOWT BS-GOWT Body-Solid Olympic Weight Tree and Bar Rack | GOWT 4.6666666666667 3
    $ 164 In stock 2021-12-12

    Keep your workout area safe, clean and organized with this Body-Solid Olympic Weight Tree and Bar Rack | GOWT! Six 2″ x 8″ weight plate storage posts keep plates safely suspended off the floor for easy storage and removal –just slip on the weights after you’re done and you’ll keep your workout room uncluttered. It can hold up to 1,000 lbs. of weight in several configurations, including a series of 45-, 35-, 25-, 10-, 5-, and 2.5-pound weights.

    The rack also offers space to store a pair of Olympic bar holders, and includes a central weight-load distribution system that virtually eliminates the risk of tipping. Made of high-tensile-strength steel with all-four-side welded construction and finished with ultra-tough, electrostatically applied powder coat finish, the Body-Solid Olympic Weight Tree and Bar Rack | GOWT measures 23 by 40 by 20 inches (W x H x D) and carries a lifetime warranty. The weight plates and bars are sold separately.

    Silver gray finish. Weight plates and bars optional

    Brian P.
    5/ 5stars

    "The box arrived in good condition and the components were all there with no damage. As I pulled the items out of the box I was a bit skeptical that this unit could hold 1000 pounds, but I knew I would not be putting nearly that much on it anyway. I have 4 x 45s, 4 x 35s, 4 x 25s, 6 x 10s, 8 x 5s and 4 x 2.5s on this Tree - 530 pounds. I think I would be comfortable putting about 100 pounds more on it and honestly that is probably all I could fit before running out of space on the pegs. I have the Marcy Grip Olympic weights that are not round....they have 12 sides. Prior to my purchase I wondered if the spacing would work out on this Tree since the middle and top bars look too close together in the picture, that has not been an issue at all. On one side from bottom to top I have 45s, 10s, and 2.5s. On the other side from bottom to top I have 35s, 25s, and 5s. There is plenty of room and there are no interference issues. Bar Holders - I really like that this unit has the bar holders. I have an Olympic tricep bar on one side and an Olympic E-Z curl bar on the other. I thought the bottom plates would be too close together and would have an issue with the bar. The bars do rub on the plates when pulling them out, but not as bad as I thought and it isn't a real issue. Depending on the shape of your plates it could be an issue for you and you might need to leave a gap when sliding on the bottom plates on the weight tree."

    ~

    5 5
  2. Body-Solid Olympic Weight Tree and Bar Rack | GOWT

    Body-Solid Olympic Weight Tree and Bar Rack | GOWT BS-GOWT Body-Solid Olympic Weight Tree and Bar Rack | GOWT 4.6666666666667 3
    $ 164 In stock 2021-12-12

    Keep your workout area safe, clean and organized with this Body-Solid Olympic Weight Tree and Bar Rack | GOWT! Six 2″ x 8″ weight plate storage posts keep plates safely suspended off the floor for easy storage and removal –just slip on the weights after you’re done and you’ll keep your workout room uncluttered. It can hold up to 1,000 lbs. of weight in several configurations, including a series of 45-, 35-, 25-, 10-, 5-, and 2.5-pound weights.

    The rack also offers space to store a pair of Olympic bar holders, and includes a central weight-load distribution system that virtually eliminates the risk of tipping. Made of high-tensile-strength steel with all-four-side welded construction and finished with ultra-tough, electrostatically applied powder coat finish, the Body-Solid Olympic Weight Tree and Bar Rack | GOWT measures 23 by 40 by 20 inches (W x H x D) and carries a lifetime warranty. The weight plates and bars are sold separately.

    Silver gray finish. Weight plates and bars optional

    Vincent E.
    4/ 5stars

    "Very good value for the money. I would actually give this 4.5 stars as it has some minor flaws. This holds a lot of weight. I have ten 45s on the bottom rung and 25s, 10s and 5s on the two upper rungs. I can fit two more 45s on the bottom rung for 12 total. That's 540 pounds just in 45s which if you work out alone is probably more than you will ever need. Construction is sturdy for the price and assembly took less than 15 minutes. Also, the bar holders won't really work with 45s on the bottom unless you space them away from the upright post. Otherwise the plates are too close to allow the bar to fit in. This is not important to me but you should be aware of it. I always thought plate trees should be designed so that you can fit 45s on any post. This one does not allow that. However since it holds 12 on the bottom it's enough for just about anybody. Also you can put 45s on the top and bottom if you don't install the middle post. That will give you 24 45s. Unless you are a Mr. Olympia contestant you will have no need for that much capacity."

    ~

    4 5
  3. Body-Solid Olympic Weight Tree and Bar Rack | GOWT

    Body-Solid Olympic Weight Tree and Bar Rack | GOWT BS-GOWT Body-Solid Olympic Weight Tree and Bar Rack | GOWT 4.6666666666667 3
    $ 164 In stock 2021-12-12

    Keep your workout area safe, clean and organized with this Body-Solid Olympic Weight Tree and Bar Rack | GOWT! Six 2″ x 8″ weight plate storage posts keep plates safely suspended off the floor for easy storage and removal –just slip on the weights after you’re done and you’ll keep your workout room uncluttered. It can hold up to 1,000 lbs. of weight in several configurations, including a series of 45-, 35-, 25-, 10-, 5-, and 2.5-pound weights.

    The rack also offers space to store a pair of Olympic bar holders, and includes a central weight-load distribution system that virtually eliminates the risk of tipping. Made of high-tensile-strength steel with all-four-side welded construction and finished with ultra-tough, electrostatically applied powder coat finish, the Body-Solid Olympic Weight Tree and Bar Rack | GOWT measures 23 by 40 by 20 inches (W x H x D) and carries a lifetime warranty. The weight plates and bars are sold separately.

    Silver gray finish. Weight plates and bars optional

    Simmon M.
    5/ 5stars

    "I did a lot of research prior to investing in this particular weight tree and thought my experience might help out someone else looking to purchase. To date I am very satisfied with this purchase. It is currently housing close to 450 lbs. of Olympic sized plates plus my triceps and EZ curl bars. I have no issue with plate arrangement or them fitting on this tree. I have (2) 35's on lower left peg, (4) 45's on lower right, (6) 10's on middle left, (4) 25's on middle right, (6) 5's on upper left and (4) 2.5's on upper right. The construction is solid - no play or wobble to the tree once fully loaded. It is true that the plate holding pegs are kept in place with a tension screw (and not socketed into a hole), but if it's screwed in tight enough I cannot ever envision the pegs moving. It took me about a half hour to put this together, all of the pieces were wrapped and all of the hardware accounted for. Again, thoroughly happy with this purchase. There are some other more expensive weight trees out there but I this really is the sensible option - especially given that it can house 2 Olympic sized bars. Highly recommended."

    ~

    5 5

6 Months 0% Interest

Interest Free Financing Available

Fast Delivery
Always on Time. In-Home Delivery & Assembly Services Available.


Lower Price Guarantee
Lowest Prices with the Top Manufacturers.


Customer Service
Phone and Online Specialists.
(800) 771-2730


Fast Delivery
Always on Time. In-Home Delivery & Assembly Services Available.


Lower Price Guarantee
Lowest Prices with the Top Manufacturers.


Customer Service
Phone and Online Specialists.
(800) 771-2730